Xuegong New Materials Group

Product Catalog

All-Purpose Alkali-Free Adhesive Powder

Premium alkali-free adhesive concentrate, also called Easy Glue. Native corn starch and water must be added. This is not a water-only ready mix. The reference batch does not add water-resistance agent, crosslinker, caustic soda, borax, or defoamer.

All-Purpose Alkali-Free Adhesive Powder — Image 1

All-Purpose Alkali-Free Adhesive Powder

Key Features

  • Concentrate: native corn starch and water are required
  • Not the water-only complete corrugator powder
  • Preferred dry ratio 1:2; 1:3 is usable with slower drying
  • Reference batch adds no water-resistance agent, crosslinker, caustic, borax, or defoamer
  • Use full bags; blend a full bag before splitting a sample
  • Two-step wet reference batch takes about 55–70 minutes
  • Lab-check local starch before scale-up
  • Stir if the liquid separates; do not mix with strong alkali glue

Product Description

Xuegong all-purpose alkali-free adhesive powder is a premium concentrate. The plant must add native corn starch and water. It is not ready to run on water alone. The reference batch does not call for a water-resistance agent, crosslinker, caustic soda, borax, or defoamer, which is why it is nicknamed Easy Glue.

It is not the same product as the water-only corrugator adhesive powder. That complete dry powder is packed at 25 kg per bag. The recommended mix is 50–75 kg of room-temperature water per bag (about 1:2 to 1:3 powder to water). Adding 100 kg of water is a 1:4 viscosity ceiling, not the normal recipe. Stir with room-temperature water; it is not a traditional cooked starch glue. One tonne of that powder is one tonne of dry adhesive system, with no extra starch. Do not use its water ratio on this concentrate.

The preferred dry ratio for this concentrate is concentrate to native corn starch = 1:2. A 1:3 ratio can be used, with slower drying. Any other ratio needs written confirmation before a trial. Local starch should be checked in the lab first. Do not assume it matches the reference starch. Cutting the concentrate share affects tack, strength, drying speed, and stability.

Reference two-step wet mix, one full bag. Step 1: 160 kg room-temperature water (do not exceed 165 kg), add 37.5 kg native corn starch, and stir 5–10 minutes; then, while stirring, add one full 25 kg bag of concentrate and continue for about 30–35 minutes. Step 2: 55 kg room-temperature water (do not exceed 60 kg), stir about 10 minutes; then add 12.5 kg native corn starch and stir 10–15 minutes. The batch is 25 kg concentrate, 50 kg starch, and about 215 kg water, giving about 290 kg of liquid adhesive. Adding the stages, full preparation is about 55–70 minutes.

Use the powder by the full bag. If a sample is under 25 kg, blend a full bag first, then split a representative portion. Liquid adhesive can separate if it sits; stir before use. Small water changes adjust viscosity: viscosity rises when the mix is cold and falls when it is hot. Do not blend it with a strongly alkaline glue. Some notes mention adding borax in hot weather, but they give no dose. Do not add borax until that dose is confirmed in writing. Dry-blending concentrate and starch first has not been shown to match this wet method. Run a side-by-side trial before changing the process.

Modified filler replaces part of the starch so less grain starch is used. This powder is a standardized premix, not a 100% high-activity concentrate. Drying, tack, and strength move with the concentrate ratio, the local starch, and the water. Treat the reference batch as a starting method, and release the recipe only after a plant trial.

Technical Specifications

Product TypePremium concentrate; add native starch and water
Powder Moisture≤8%
Preferred Dry RatioConcentrate:native corn starch = 1:2
Usable Dry Ratio1:3 usable, slower drying; other ratios need written confirmation
Reference Batch25 kg concentrate + 50 kg starch + about 215 kg room-temperature water
Preparation TimeAbout 55–70 minutes for the two-step wet mix
Shelf Life18 months (sealed packaging)
Packaging25 kg bags, 500 kg/1000 kg bulk bags
Do Not CopyWater-only complete powder, or special corrugated-board glue ratios

Related Products

Alkali-Free Adhesive Series

Alkali-Free Adhesive Series

Alkali-free laminating adhesive, core adhesive, and facing adhesive — eliminating caustic soda for safer, greener, and more cost-effective production.

Custom Adhesive Powder Service

Custom Adhesive Powder Service

A made-to-order formulation service — custom adhesive powders for your paper grades, lines, and process conditions, with sampling, on-site trials, and scale-up support.

Classic Products

Classic Products

Time-tested traditional starch formulations — yellow adhesive, core and facing grades — for plants optimized on classic cook processes, with a path to alkali-free upgrades.

Need the right adhesive for your line?

Contact our engineers for grade matching, process advice, and a tailored quotation for corrugated adhesives.

Send Inquiry