Product Catalog
For domestic and imported automatic board lines producing 3-, 5-, and 7-ply board; replaces expensive additives. About 15% higher ECT, gel point ~4–6°C lower; use alone or blend with starch.
Xuegong corrugated board strengthening agent is used on domestic and imported automatic paperboard lines to produce 3-, 5-, and 7-ply board, and can replace other expensive additives.
Strong film: the reinforced special adhesive forms a hard film; flat crush and edge crush of bonded board improve clearly. Edge crush rises by about 15%, hand-feel flat crush also improves significantly — performance fully reaches or exceeds other costly additives.
Excellent moisture resistance: after moisture-resistant treatment, film moisture resistance is clearly higher than pure starch adhesive and comparable to other expensive water-resistant additives, better meeting carton moisture needs in humid environments.
Low gelatinization point: gel point is about 4–6°C lower than common starch, ensuring firm bonding and clearly higher start-up speed.
Strong bonding: adhesive strength is high and meets or exceeds national standards. Lower price — much cheaper than other expensive additives.
Usage: use alone (no extra starch) or with starch — 1 part reinforcing powder with 1, 2, or 3 parts starch equals 2, 3, or 4 parts starch respectively; cook process same as corn starch. Clearly raises board strength and start-up speed, improves moisture resistance, and saves cost.
| Appearance | White or slightly yellowish powder |
| Odor | No abnormal odor |
| Fineness (80 mesh) | ≥95.0% |
| Bond Strength (room temp) | ≥5.88×10² N/m |
| pH | 7±2 |
| Moisture | ≤14% |
| ECT Gain | About 15% |
| Gel Point | ~4–6°C lower than common starch |
| Packaging | 25 kg bags |
| Standard | Q/HXG01-2006 |
Optimize corrugating adhesive use when take-up factor, flute profile, and paper stretch interact—film weight targets, gap settings, and bond verification.
Diagnose corrugated board crush—from flute damage and roll pressure to moisture and adhesive issues—and apply QC methods that restore caliper, ECT, and stack performance.
A practical guide to corrugated board strength testing methods, what the numbers mean, and how to specify the right board for your packaging needs.
For domestic and imported automatic board lines and single-facers producing 3-, 5-, 7-, and 9-ply board. Replaces pure starch or starch-plus-additive systems. ECT gain over 10%, gel point ~5–6°C lower, dosage about 80% of ordinary pure starch glue.
Alkali-free laminating adhesive, core adhesive, and facing adhesive — eliminating caustic soda for safer, greener, and more cost-effective production.
Time-tested traditional starch formulations — yellow adhesive, core and facing grades — for plants optimized on classic cook processes, with a path to alkali-free upgrades.
Contact our engineers for grade matching, process advice, and a tailored quotation for corrugated adhesives.
Send Inquiry