
Neutral Adhesive
Balanced pH adhesive formulated for stable, high-quality corrugated board bonding without paper discoloration. China's first neutral starch adhesive for honeycomb applications.
Product Catalog
Full-line honeycomb paperboard adhesive covering core-strip and facing/lamination grades. Core making about 10–200 m/min; face laminating about 4–30 m/min. Cold/hot press; slow to instant dry adjustable.

Xuegong special glue for honeycomb paperboard lines covers the full honeycomb industry and suits various honeycomb equipment for boards and finished products.
Grades: core-strip adhesive meets core-making start-up speeds of about 10–200 m/min; facing/lamination (compound, stacking) adhesive meets face-board speeds of about 4–30 m/min.
Available for cold-press and hot-press bonding; elastic and rigid film grades; slow-, fast-, quick-, and instant-dry options. Can run with or without heating — heating can be skipped at lower speeds, and heating clearly raises start-up speed when used.
Among the earliest supporting glues developed for China’s honeycomb paperboard industry and a preferred choice after continuous improvement. Key strengths: fast drying with adjustable speed; firm bonding; excellent moisture resistance with anti-corrosion and anti-mildew performance; easy viscosity control; low consumption and cost; natural, green, and readily degradable; smooth, clean board appearance.
Facing glue has two preparation routes. Before ordering, confirm whether the facing step adds starch. The water figures below apply only to honeycomb facing glue. Do not copy them onto core-strip glue, paper-tube glue, or corrugator glue.
Complete low-temperature facing powder is for plants that add water only, with no extra starch or filler: 25 kg of powder plus 30–40 kg of room-temperature water, about 1:1.2 to 1:1.6. Charge the water first, then the powder, and stir for about 30 minutes. Adjust viscosity by changing water inside that range. Less water dries faster; more water dries slower. Less water also raises viscosity, and the mix must still coat evenly on the facing machine. One bag yields about 55–65 kg of liquid glue. A quantified recipe below 30 kg of water is not confirmed. Do not drop below that range on your own.
Premium low-temperature facing powder is for plants that add their own starch and filler: 25 kg of powder plus 40–60 kg of room-temperature water. Step 1: charge water, add the powder, and stir about 20 minutes until lump-free. Step 2: in a second tank, charge water, add starch and filler, and stir until lump-free. Step 3: pump the first tank into the second and stir until lump-free before use. Starch type, filler type, and the kilograms of each must be confirmed before the trial. This is not the 1:2 corrugator-concentrate recipe.
| Appearance | White or slightly yellowish powder |
| Odor | No abnormal odor |
| Fineness (80 mesh) | ≥95.0% |
| Bond Strength (room temp) | ≥5.88×10² N/m |
| pH | 7±2 |
| Moisture | ≤14% |
| Core-Making Speed | About 10–200 m/min |
| Facing Line Speed | About 4–30 m/min |
| Packaging | 25 kg bags |
| Grades | Core-strip; facing/lamination |
| Facing, Water Only | 25 kg powder + 30–40 kg room-temperature water; stir about 30 minutes |
| Facing, With Starch | 25 kg powder + 40–60 kg room-temperature water, two tanks; starch and filler weights confirmed separately |
Mix honeycomb facing glue on one of two routes. Water only uses 25 kg of powder and 30–40 kg of water. Adding starch uses 25 kg and 40–60 kg, in two tanks. Do not use this sheet on core glue.
Honeycomb core making is about 10–200 m/min. Face laminating is about 4–30 m/min. Cold press and hot press both exist. A slow start can run with the heater off.
Honeycomb line glue can be specified with an elastic or a rigid film, and with dry speed from slow to instant. On water-only facing glue, less water dries faster. Do not go below 30 kg of water.
A honeycomb trial is two grades, one facing route, and a short record. Without the bag name, the water, the heater, and the stack time, the next batch cannot repeat the day that worked.

Balanced pH adhesive formulated for stable, high-quality corrugated board bonding without paper discoloration. China's first neutral starch adhesive for honeycomb applications.

Green, water-based formaldehyde-free resin adhesive powders for packaging with strict formaldehyde controls. Replaces costly formaldehyde-containing adhesives. For paper-tube/corner and honeycomb specialty grades, see dedicated pages.

A made-to-order formulation service — custom adhesive powders for your paper grades, lines, and process conditions, with sampling, on-site trials, and scale-up support.
Contact our engineers for grade matching, process advice, and a tailored quotation for corrugated adhesives.
Send Inquiry