
Special Glue for Honeycomb Paperboard Line
Full-line honeycomb paperboard adhesive covering core-strip and facing/lamination grades. Core making about 10–200 m/min; face laminating about 4–30 m/min. Cold/hot press; slow to instant dry adjustable.
Product Catalog
Balanced pH adhesive formulated for stable, high-quality corrugated board bonding without paper discoloration. China's first neutral starch adhesive for honeycomb applications.

Xuegong's neutral adhesive is specially formulated with a balanced pH for applications where alkaline or acidic adhesives may cause problems. This product is ideal for bonding sensitive materials or when maximum board quality and appearance are required.
The neutral pH formulation provides excellent compatibility with a wide range of paper grades and reduces the risk of discoloration or degradation over time. It is particularly well-suited for high-quality packaging applications, white-top linerboard, and printed packaging where appearance matters.
Xuegong pioneered China's first neutral starch adhesive and premium raw starch adhesive series for honeycomb paper applications, accelerating the application and development of honeycomb paper, significantly improving honeycomb board quality and production speed, enabling thin honeycomb board to be successfully used in honeycomb cartons, and greatly expanding the application range of honeycomb paper.
Our neutral adhesive technology combines the best properties of traditional starch adhesives with modern formulation techniques to deliver consistent, reliable performance across varying production conditions and humidity levels.
| pH Value | 6.5–7.5 (neutral) |
| Viscosity | 35–50 seconds (Stein-Hall cup) |
| Solid Content | ≥20% (prepared adhesive) |
| Setting Time | 2–4 seconds at operating temperature |
| Recommended For | High-quality packaging, white-top liner, honeycomb |
China’s first neutral starch adhesive for honeycomb paper keeps white and coated liners from yellowing. It is the appearance grade. Core and facing production grades stay on the honeycomb line glue.
Mix honeycomb facing glue on one of two routes. Water only uses 25 kg of powder and 30–40 kg of water. Adding starch uses 25 kg and 40–60 kg, in two tanks. Do not use this sheet on core glue.
Honeycomb core making is about 10–200 m/min. Face laminating is about 4–30 m/min. Cold press and hot press both exist. A slow start can run with the heater off.
Honeycomb line glue can be specified with an elastic or a rigid film, and with dry speed from slow to instant. On water-only facing glue, less water dries faster. Do not go below 30 kg of water.

Full-line honeycomb paperboard adhesive covering core-strip and facing/lamination grades. Core making about 10–200 m/min; face laminating about 4–30 m/min. Cold/hot press; slow to instant dry adjustable.

Green, water-based formaldehyde-free resin adhesive powders for packaging with strict formaldehyde controls. Replaces costly formaldehyde-containing adhesives. For paper-tube/corner and honeycomb specialty grades, see dedicated pages.

Laminators are also known as paper mounting / face laminating machines. Starch powder for semi-automatic and automatic units. Instant/fast dry, low coat weight, hard moisture-resistant film, strength at or above white latex.
Contact our engineers for grade matching, process advice, and a tailored quotation for corrugated adhesives.
Send Inquiry