Technical Guides
5 Ways to Reduce Energy Costs in Corrugated Board Production
Practical strategies for reducing energy consumption in your corrugating operation.
energy savingcost reduction

- Upgrade to Boiler-Free Technology: Reduces energy by up to 60%
- Optimize Preheating Systems: Use perimeter-heated hot plates
- Use Instant-Setting Adhesives: Work at room temperature
- Implement Production Scheduling Optimization
- Regular Maintenance and Calibration
More in Technical Guides
Honeycomb Facing Glue: Floor Mixing for the Two Routes
Mix honeycomb facing glue on one of two routes. Water only uses 25 kg of powder and 30–40 kg of water. Adding starch uses 25 kg and 40–60 kg, in two tanks. Do not use this sheet on core glue.
Honeycomb Lines: Heat, Press, and the Two Speed Windows
Honeycomb core making is about 10–200 m/min. Face laminating is about 4–30 m/min. Cold press and hot press both exist. A slow start can run with the heater off.
Honeycomb Glue Film and Dry Speed: Slow, Fast, Quick, or Instant
Honeycomb line glue can be specified with an elastic or a rigid film, and with dry speed from slow to instant. On water-only facing glue, less water dries faster. Do not go below 30 kg of water.